The only thing you don’t need when you have a project that you have to record as soon as it is finished, and after many hours of work, you realize that it is laggy, interrupted, the sound is also delayed and you simply will not be able to use the material. Thus, you end up, after hours of work, left with only lost time, without energy, being forced to repeat the whole process.
You can avoid this, and there are a few ways to get rid of sluggish screen recordings, but first you must identify which ones are causing the lag.Every cause has its solution, so here are the reasons why your screen recording is laggy.
Cause #1: Wrong recorder settings
Depending on the settings you have made for your screen recording software, your computer will allocate the necessary resources to be able to process the recording. If the settings are incorrect or the resolution set in the recorder does not match, your computer will process the recording incorrectly, allocate very few resources and from there the lag may occur.
Cause #2: The recorder is simple
When you want to drive a nail, you need a pretty good hammer, otherwise the nail will not be good and you will struggle a lot. An example that applies very well to any recording screen software. Not every screen recording software that exists will meet your requirements or will be able to work perfectly. Your PC may be very powerful, with the right settings, but the software it uses may not be up to date or even not as powerful.
Check the best screen recorders for Windows – 2021 Edition
Cause #3: The computer is pretty weak.
Not every PC or laptop can complete a screen recording process in a few hours. You need a device with enough power to support this process. If you start a screen recorder and the processor is already at 100%, but you don’t have much RAM, the recording will continue to work slowly.When it comes to computer performance, you need to be very careful about all of its specifications.
Both the processor, RAM, and even the video card are components that can help you get better performance.
How can you fix Laggy Screen Recording
Given the factors that favor the appearance of the lake, you should probably make sure that they are avoided as much as possible. We will take them one by one to discuss every detail. There are users who do not have enough resources to invest in a PC of thousands of dollars that could solve all the problems, so we must offer solutions for everyone.
Laggy Screen Recording Tip #1: Don’t overload your PC with too many applications
It is a very common tip, but one that is also very helpful. Most of the time, when the screen recorder stings, it crashes or shows traces of lag due to too much demand on the computer or device from which you are recording. The first thing you can do before you start recording is to free up as much RAM and processing power as possible.
You can do this by closing the applications that you normally keep open to let your computer’s processing power handle screen recording only.
Laggy Screen Recording Tip #2: Sets the GPU to High Performance
It is a very useful trick that often doubles the processing capacity of computers. Users who are passionate about games use this setting so that they can run more demanding games. If you are one of the users who uses a laptop when it is not plugged in, most of these devices have a battery saving system called Power Saving.
When the system works in Power Saving mode, it also decreases the processing power of your computer and implicitly that the performance will be drastically reduced. That is, from 100% power, the system wants to save the battery and will reduce the processing power to 50%. The screen recording software will lag if the power is cut in half.
Go to Settings – Display and, from the Power Saving setting, change it to High Performance to be able to set the computer to its maximum processing capacity.
Laggy Screen Recording Tip #4: Check your technical settings
Depending on the recording software you use, there are several technical settings that can be used. Some of them may not be in your software, but most will be there. Here are these:
If your PC is not powerful enough and each recording comes bundled with lag, you can go to the screenshot settings and identify the size value. This is a setting that allows you to change the size from full to half.It will basically halve the screen capture size and double the processing power.
Reduce the FPS – In another article, I told you that the number of frames per second must be as high as possible for the image to be as good as possible. Which is totally true. But a higher FPS means higher processing power and, therefore, a better PC. If the current FPS setting is 30, you can set it to 15 FPS and let your PC breathe, but your image will not be as clear.
Conclusion
A laggy screen recording is as useful as the lack of a screen recording. Rather than delivering content that crashes, has a delay, in which the sound is heard with interference or the images go slowly and are not clear, you better not deliver at all. The problem with laggy recordings is one of the biggest problems that users face. Most of the time, the cause is a PC without processing power.